Generalizing functions with hardwired values
Chapter 1.3: Formulating Abstractions with HigherOrder Procedures
1.3.1
1.3 presents the following higherorder function:
(define (sum term a next b)
(if (> a b)
0
(+ (term a)
(sum term (next a) next b))))
It’s worth noting that sum
is not as general as it could be. It hardwires in a terminal value of 0, and the +
and >
operator & conditional. Its type would be something like sum :: (Num a) => (a > a) > a > (a > a) > a > a
; a more general approach would be to require a general boolean function rather than a particular value.
iterate is similar, but note that it has a type signature that initially seems simpler and less powerful: iterate :: (a > a) > a > [a]
. Surely the more parameterizable a function, the more general it is? iterate
has but 1 function argument, while sum
has 2.
But iterate
has 2 arguments in a sense, when we remember how it generates an infinite list—we can think of it as the zeroth entry is x
, the first entry f x
, the 2^{nd} entry is f (f x)
, the 3^{rd} entry is f (f (f x))
, and so on^{1}. The missing function is whatever is calling iterate
and using its values; in sum
, the termination is explicitly handled by a function because the evaluation scheme in Scheme is strict.
Here’s an example. If we called iterate (^3) 2
, we would get the infinite list [2,8,512,134217728,2417851639229258349412352..]
; but sum
clearly has a stopping case. So we compose iterate
with takeWhile: iterate
gets the seed value and the knowledge of how to keep changing the seed value, and takeWhile
gets the knowledge of when the seed value has changed enough.
This will be useful for approximation. But note that it’s not useful for straight summing like sumcubes
, because iterate
uses the passedin function to generate the next target from the old target, while sum
has the passedin function doing something else entirely (moving from old to new is hardwired to use the function (+1)
). So if we wrote the obvious Haskell summation
and sumCube
definitions, they would be utterly wrong: sumCube 1 10
will loop because 1^{3} = 1, and if we tried sumCube 2 10
, it’d still be wrong—we’d get [2,8]
because the test will return false for 8^{3} < 10.
summation cond next seed = takeWhile cond (iterate next seed)
sumCube start end = summation (< end) (^3) start
To rewrite sum
, we need to pay attention to what dependencies are where. Given the parameters a b
, we can get the targets with just [a..b]
; then, we take whatever function and map
it onto the targets: foo f a b = map f [a..b]
; then we fold the resulting list into a final answer: foo f a b = sum (map f [a..b])
, and finally:
sumCube start end = foo (^3) start end
But sum
has 4 parameters, not 3. The [a..b]
hides the (+1)
or inc
specification.
Exercise 1.29
Pseudocode from the specification:
simpson f a b n =
(h/x) * [y 0 + 4 * y 1 + 2 * y 2 ... + y n]
where h = (b  a) / n
y k = f (a + k * h)
The tricky part is the middle of the summation. We need to multiply by 2 or 4 except for the first and last terms. Kind of hard to express that as a simple recursion. We could generate that middle directly by generating the indices ([1..(n1)]
), running y
on them (map y
), creating an infinite list of coefficients (cycle [2,4]
), and combining the coefficients with the transformed indices (zipWith (*)
), and then directly specify the y 0
and y n
calls so we have something like:
simpson :: (Fractional a, Enum a) => (a > a) > a > a > a > a
simpson f a b n =
(h/3) * y 0 * sum (zipWith (*) (cycle [2,4]) (map y [1..(n1)])) * y n
where h = (b  a) / n
y k = f (a + k * h)
Ugly, though it works, for example
simpson cube 0 1 1000 → 0.2496671666666665
(This has diminishing returns; a n of 1000000 gives the threeplaces more precise 0.24999966666716916 but is much slower.)
If we didn’t want to use the various Prelude operators in a Scheme version, we’d have to drag around state in the form of a variable.
(define (simpson f a b n)
(let ((h (/ ( b a) n)))
(define (simpsonterm k)
(* (f (+ a (* k h)))
(cond ((or (= k 0) (= k n)) 1)
((odd? k) 4)
(else 2))))
(* (/ h 3)
(sum simpsonterm 0 inc n))))
Interestingly, Dr. Scheme evaluates (simpsonintegral cube 0 1 1000)
to 1⁄4. I don’t know how it can be so precise.
Exercise 1.30
(define (sum term a next b)
(if (> a b)
0
(+ (term a)
(sum term (next a) next b))))
(define (sum term a next b)
(define (iter a result)
(if <??>
<??>
(iter <??> <??>)))
(iter <??> <??>))
Ought to be straightforward by this point (especially since half the battle is figuring out the auxiliary function iter a result
):
(define (sum term a next b)
(define (iter a result)
(if (> a b)
result
(iter (next a) (+ result (term a)))))
(iter a 0))
Exercise 1.31
Our sum
rewritten for multiplication is of course (modulo better variable names):
(define (product f begin increase end)
(if (> begin end)
1
(* (f begin)
(product f (increase begin) increase end))))
All we had to change was the ‘seed’ and the inner function (*
versus +
).
Writing a factorial
requires a little imagination, but here Haskell prevents me from having to think too much; Haskell’s product has the type signature Num a => [a] > a
, so immediately the obvious way to define factorial
is to generate a list of the right length:
factorial n = product [1..n]
How can we generate such a list with this Scheme function? We have to pass in 2 functions and 2 integers which will somehow do this.
The answer is to make our first function do nothing, and the second function just increment the seed; an example:
(product (lambda (a) a) 1 (lambda (g) (+ g 1)) 5)
→
120
The (lambda (a) a)
is bound to the variable f
, which gets called on the first multiplication, but does nothing—exactly as needed. Then (lambda (g) (+ g 1))
takes care of generating the next entry in the Scheme equivalent of [1..n]
.
Monoids
A worldly Haskeller will look at this and immediately think, ‘an initial seed value, and some way of combining values… could this idea be a monoid‽’
As sigfpe’s excellent tutorial or Learn You A Haskell or Real World Haskell will tell us, yes—this is a monoid. In fact, integers (our topic) form two different monoids, one for addition (Sum) and one for multiplication (Product).
The Monoid
typeclass requires the following:
class Monoid a where
mempty :: a
mappend :: a > a > a
mconcat :: [a] > a
mempty
is our ‘seed’ value—it is the identity. For Sum, 0 + n = n; for Product, 1 × n = n.
mappend
is how to combine 2 such monoids. Both (+)
and (*)
have the right type signature: Num a => a > a > a
.
mconcat
can be automatically defined from mempty
and mappend
—you just prefix a mempty
onto the list, and then proceed to mappend
your way down it.
This works out perfectly for +
and *
:
mconcat [1..5]  for Product
→
fold [mempty, 1, 2, 3, 4, 5]  not the actual fold; artistic license
→
mempty `mappend` 1 `mappend` 2 `mappend` 3 `mappend` 4 `mappend 5
→
1 `mappend` 1 `mappend` 2 `mappend` 3 `mappend` 4 `mappend 5
→
1 * 1 * 2 * 3 * 4 * 5
→
120
mconcat [1..5]  for Sum
→
fold [mempty, 1, 2, 3, 4, 5]  not the actual fold; artistic license
→
mempty `mappend` 1 `mappend` 2 `mappend` 3 `mappend` 4 `mappend 5
→
0 `mappend` 1 `mappend` 2 `mappend` 3 `mappend` 4 `mappend` 5
→
0 + 1 + 2 + 3 + 4 + 5
→
15
Notice that right up to the final steps everything was the same.
If we wanted to use the Sum or Product monoids in actual code, we would use the Data.Monoid library, which gives us Sum and Product on everything in the Num typeclass:
import Data.Monoid
...
mconcat (map Product [1..5])
→
Product {getProduct = 120}
mconcat (map Sum [1..5])
→
Sum {getSum = 15}
So, mconcat
is basically our sum
or product
but abstracted away from a specific monoid and how to generate the [a]
argument.
A great many data structures or datatypes are monoids; they’re worth knowing about.
Exercise 1.32
“
(accumulate combiner nullvalue term a next b)
accumulate
takes as arguments the same term and range specifications assum
andproduct
, together with a combiner procedure (of two arguments) that specifies how the current term is to be combined with the accumulation of the preceding terms and a nullvalue that specifies what base value to use when the terms run out. Writeaccumulate
and show howsum
andproduct
can both be defined as simple calls toaccumulate
.”
(define (accumulate combiner nullvalue term a next b)
(define (iter a result)
(if (> a b)
result
(iter (next a) (combiner (term a) result))))
(iter a nullvalue))
Then we define sum
and product
by specializing accumulate
in its first 2 arguments:
(define (sum term a next b)
(accumulate + 0 term a next b))
(define (product term a next b)
(accumulate * 1 term a next b))
With monoids
So. combiner
takes 2 arguments of the same data type (such as Int
and Int
) and produces a third argument of the same data type; that is, combiner :: a > a > a
, or since we just covered monoids, we’ll say (Monoid a) => a > a > a. The first hit is Data.Monoid mappend :: Monoid a => a > a > a
.
The nullvalue is simply that same data type, (Monoid a) => a; the first hit is Data.Monoid mempty :: Monoid a => a
With an instance of the Monoid typeclass, we can scrap the nullvalue and combiner
arguments since they are predefined. We just need the range (a
and b
) and how to increment (next
) since the Monoid typeclass doesn’t cover that. A fairly literal translation of the previous section:
accumulate :: (Ord a, Monoid a1) => (a > a1) > a > (a > a) > a > a1
accumulate term a next b =
let iter a' result = if a' > b
then result
else iter (next a') (term a' `mappend` result)
in
iter a mempty
product :: (Ord a1, Num a) => (Product a1 > Product a) > a1 > (Product a1 > Product a1) > a1 > a
product a b c d = getProduct (accumulate a (Product b) c (Product d))
sum :: (Ord a1, Num a) => (Sum a1 > Sum a) > a1 > (Sum a1 > Sum a1) > a1 > a
sum a b c d = getSum (accumulate a (Sum b) c (Sum d))
Usage would look like
sum id 1 (\(Sum a) > (Sum (a+1))) 5
(This example evaluates to 15, and is equivalent to sum [1..5]
.)
Exercise 1.33
I cheat a little here, and just rewrite combiner
to get the filter effect:
(define (accumulatefilter combiner filter nullvalue term a next b)
(define (combinerfilter x y) (if (filter x) (combiner (term x) y) y))
(define (iter a result)
(if (> a b)
result
(iter (next a) (combinerfilter a result))))
(iter a nullvalue))
Again we specialize (assuming the obvious definitions for square
, inc
, prime?
, and gcd
):
(define (sumsquaredprimes a b)
(accumulatefilter + 0 square a inc b prime?))
(define (productrelativeprime n)
(define (relative? k) (= (gcd k n) 1))
(filteredaccumulator * 1 (lambda x x) 1 inc ( 1 n) relative?))
1.3.2
The remarks on scoping and how lambda is what lurks behind the sugar of let
are true in Haskell as far as I know, and thus a bit boring to me.
Exercise 1.34
We’re asked to evaluate (f f)
given:
(define (f g)
(g 2))
Quickly eyeballing it, I assumed it would turn out to be an infinite loop, as it became something like (f (f (f (f (f...)))))
. But when I calculate it out by hand, I realize that is not the case!
(f f)
(lambda (x) (x 2) f)
(f 2)
(lambda (x) (x 2) 2)
(2 2)
 Dr. Scheme error: “procedure application: expected procedure, given: ‘2’; arguments were: ‘2’”
1.3.3

This is the idea; the actual implementation is more syntactically efficient:
iterate f x = x : iterate f (f x)
.↩︎